Noctua Thermal Grease NT-H1
Noctua’s NT-H1 is a pro-grade TIM solution for enthusiasts who demand both exceptional performance and maximum ease of use: A hybrid compound of different micro-particles allows for minimum thermal resistance, excellent ease of use and outstanding long-term stability.
NT-H1 consists of a hybrid compound of different micro-particles, which has been specifically optimized for use in PC environments. Thanks to its extremely low thermal resistance as well as excellent pliability and spreadability, NT-H1 achieves outstanding results.
NT-H1 Maximum ease of use & efficient dosage
As NT-H1 spreads very well under pressure, there’s no need to smear it over the heat-spreader. This reduces both the consumption of paste and the time spent on the installation process: Put one drop of NT-H1 onto the centre of your CPU, install the cooler and that’s it!
NT-H1 Top-performance right from the start
NT-H1 reaches its full performance extremely fast and doesn’t require a longer “burn-in” time.
NT-H1 Excellent long-term stability
NT-H1 doesn’t contain any solvents or other substances with low flash point and provides excellent long-term stability. Due to the compound’s exceptional curing, bleeding, dry-out und thermal cycling characteristics, NT-H1 can be used for several years without any problems.
NT-H1 Not electrically conductive, non-corroding
NT-H1 possesses a very low dielectric constant and a high dielectric strength. Therefore, there’s no danger of short-circuits even in case of direct contact with components or conducting paths. Fully compatible with all materials commonly employed in PC environments, NT-H1 is suited for use with aluminium and copper coolers.
NT-H1 Suitable for compressor cooling
NT-H1 is perfectly suited for use with compressor coolers. Even at the very lowest temperatures, the paste delivers full performance and remains easy to clean off.
|Volume||1.4ml (for at least 15 applications)|
|Specific Gravity||2,49 g/cm³|
|Recommended storage time (before use)||up to 2 years|
|Recommended usage time (on the CPU)||up to 3 years|
|Peak operating temperature||-50°C to +110°C|
|Recommended operating temperature||-40°C to +90°C|